Wacom Cintiq Pro 32 Manual page 237

Statistic Description
USB This section displays the port mode, model, status, device class, subclass, protocol, vendor
Devices identification (VID), and product identification (PID) of the USB device attached to the client.
USB Device Status options include:
Status

Each USB device possesses one device descriptor and an interface descriptor for each device function
Every USB device has a single device descriptor as well as an interface descriptor for each of the device's functions.
(For example, a USB device with a camera, microphone, and button would have an interface descriptor for each
function.)
In the USB specification, the USB Device Class, Sub Class, and Protocol class code fields identify a device's
functionality so that the correct device driver will load for the device. Depending on the device, this information can
display in either the device descriptor or the interface descriptors, or in both.
If a device is authorized, the Device Class, Sub Class, and Protocol class code fields that display on
the Attached Devices page are the same values obtained from the device descriptor.
If a device is not authorized, the Device Class, Sub Class, and Protocol class code fields that
display on the Attached Devices page are the same values obtained from the interface that caused
the device to fail authorization.
To view device information:
1. From the AWI, select Info > Attached Devices.
2. From the AWI Attached Devices page, view information for the devices attached to your Tera2
PCoIP Zero Client.
© 2020 Teradici
Viewing Information About Attached Devices
• Not Connected: No device is connected.
• Not in Session: The device is detected outside of a PCoIP session.
• Not Initialized: The device is detected in a PCoIP session but the host controller has not
initialized the device.
• Failed Authorization: The device is detected in a PCoIP session but is not authorized. (For more
information about USB, see
• Locally Connected: The device is detected and authorized but locally terminated in a PCoIP
session (for example, a
• Connected: The device is detected and authorized in a PCoIP session.
Configuring USB Settings and
local cursor).
Permissions.
237