Wacom Cintiq Pro 32 Manual page 93

Parameter
Password
Port
Use OSD Logo for
Login Banner
Enable Peer Loss
Overlay
Enable Preparing
Desktop Overlay
Enable RDS
Application
Access
Enable IPv6
Address
Resolution
Prefer IPv6 for
FQDN Resolution
© 2020 Teradici
OSD: View Connection Server + Kiosk Session Settings
Description
To password protect the virtual machine for the kiosk, enter a password in this field. This
password must match the one entered for the device in the View Connection Server.
By default, port 443 is used to communicate with the connection server. If your network is set
up to use a non-standard port for secure connections, enter the port number.
When enabled, the OSD logo banner appears at the top of login screens in place of the default
banner.
When enabled, the 'Network Connection Lost' overlay appears on the display(s) when a loss
of network connectivity is detected. Normal hypervisor scheduling delays can falsely trigger
this message.
When enabled, the 'Preparing Desktop' overlay appears on the display(s) when users log in.
This overlay provides assurance that login is proceeding if the desktop takes more than a few
seconds to appear.
When enabled and users connect to a VMware Horizon View Connection Server that offers
applications, a list of available applications will be presented.
Applications open in full-screen mode, but can be re-sized once users are in session.
This setting supports VMware Horizon View 6.1 implementations, which enable View-
brokered IPv6 sessions on IPv6-only networks. When enabled, clients can advertise IPv6 and
FQDN capability to the View connection Server and receive IPv6 and FQDN peer addresses
back.
When enabled, the client's IPv6 address is preferred for FQDN resolution when the client
requests a session.
93