Wacom Cintiq Pro 32 Manual page 203

Automatic Endpoint Manager Discovery Using DNS
Tera2 PCoIP Zero Clients can use DNS to automatically find an endpoint manager. To use
automatic endpoint manager discovery, you must configure the environment for DNS service
record discovery, and the Tera2 PCoIP Zero Client's security level must be set to low or medium.

Medium or high security requires an installed certificate
In order to use medium or high security, the Tera2 PCoIP Zero Client must have been provisioned with a certificate
using an endpoint manager.
For more information, see Staging Clients Using an Endpoint Manager.

DNS server Configuration Information
For details about how to configure your DNS server for automatic discovery, see the
Administrators' Guide.
To configure the Tera2 PCoIP Zero Client for automatic endpoint discovery:
1. From the AWI, select Configuration > Management. The AWI Management page displays.
2. Set the Security Level option to Low or Medium.
3. Set the Manager Discovery Mode option to Automatic.
4. Click Apply.
After the Tera2 PCoIP Zero Client discovers the endpoint manager, the automatic discovery results
appear on the Management page.

Configuring your system for automatic discovery
For information about how to configure your system for automatic discovery from the PCoIP Management Console,
see the PCoIP® Management Console Administrators'
© 2020 Teradici
Automatic Endpoint Manager Discovery Using DNS
Guide.
PCoIP® Management Console
203