Table of Contents
Advertisement
AWI: Power Permissions
The Power page lets you configure timeout and power settings for the device. You can access this
page from the Configuration > Power menu.
AWI Power page
The following parameters can be found on the AWI Power page.
AWI Power Parameters
Parameter
OSD Screen-
Saver Timeout
© 2020 Teradici
Description
Configure the number of seconds to wait after a period of inactivity (that is, no keyboard or
mouse action) before the client puts its attached displays into low power mode. Valid values are
10 to 9999, or use 0 to disable the feature.
This timeout only applies when the device is not in session.
AWI: Power Permissions
311
Advertisement
Table of Contents
