Table of Contents
Advertisement
AWI Event Log Parameters
Parameter
Enable Event Log
Event log Messages
Enable Syslog
Identify Syslog Host
By
Syslog Host IP
Address / Syslog
Host DNS name
Syslog Host Port
© 2020 Teradici
Performing Logging Tasks from the AWI
Description
When this feature is enabled, logging occurs in verbose mode, and all event log and syslog
options display.
When this feature is disabled, the logging options are hidden. Disabling the event log
disables logging and deletes existing persistent event logs. If you configure syslog settings,
logs won't be sent to a syslog server.
• View: Click to open a browser page that displays the event log messages (with
timestamp information) stored on the device. Press
log information.
• Clear: Click to delete all event log messages stored on the device.
Enable or disable the syslog standard as the logging mechanism for the device.
Note: If you enable syslog, you must configure the remaining fields. If you disable syslog, you can't
edit the fields.
Choose if the syslog server host is identified by its IP address or by its Fully Qualified
Domain Name (FQDN).
The parameter that displays depends on which option you choose to identify the syslog
server host:
• IP Address: Enter the IP address for the syslog server host.
• FQDN: Enter the DNS name for the syslog server host.
If you enter an invalid IP address or DNS name, a message appears to prompt you to
correct it.
Enter the port number of the syslog server. The default port number value is 514.
F5
to refresh the browser page
369
Advertisement
Table of Contents
