Table of Contents
Advertisement
• The Enable
Local Cursor and Keyboard
Card Software on the host computer.
• On the client, the keyboard must be recognized as locally connected (that is, not bridged).
Selecting the disconnect option
To use the up/down arrow keys, or to type in a number to select a disconnect option on this overlay, ensure that Enable
Local Cursor and Keyboard feature is enabled and the keyboard is locally connected.
For users to use the second overlay option (that is, to power off the workstation), the power
permissions on the client must be configured to enable a 'hard' power off. You can set this
parameter from the
© 2020 Teradici
Disconnecting from a Session
AWI Power Permissions
feature must be enabled on the Remote Workstation
page.
193
Advertisement
Table of Contents
