Conference Calls; Setting Up A Conference Call - Nortel IP Phone 2002 User Manual

Conference calls

This section describes features that enable conversations between more
than two people.

Setting up a Conference call

The Conference feature enables you to add up to five people to an
established call (either internal or external).
Copyright © 2006, Nortel Networks
.
1.
While on a call, press the Conference key in
the upper display area to place the party on
hold. You receive a dial tone.
2. Dial the number of the person you want to add
to the conference call. You can talk privately
to the person you are adding at this time to
announce the conference.
3. Press the Conference key a second time to
conference all parties.
Note: At this point you can press the SWAP
key to toggle between the two parties before
connecting.
4.
Repeat the step to include up to a total of six
people.
If you make a mistake dialing, or the party does
not want to be included in the conference, Press
the extension key on which the conference is
being held and you will be reconnected to the
conference.
Carrier VoIP
Nortel IP Phone 2002 User Guide
NN10300-007 06.04 Standard
(I)SN09U 20 October 2006
57
Nortel Networks Confidential