Volume Control Bar; Ringer Selection; Led Indicator - Nortel IP Phone 2002 User Manual

Step
1
2
3

Volume Control Bar

Ringer selection

LED Indicator

Copyright © 2006, Nortel Networks
.
Action
Press the key you assigned to the Outbox.
The Outbox screen appears, showing a list of the 10 most recent
calls.
Select the number you want to dial.
Press Ok.
The number is dialed.
Carrier VoIP
Nortel IP Phone 2002 User Guide
NN10300-007 06.04 Standard
(I)SN09U 20 October 2006
—End—
Use the Volume Control Bar to adjust the
volume of the handset, speaker or ringer while
active. Raise or lower the volume of each by
pressing the right or left sides of the bar.
1. From the Menu Option screen, select
Audio.
2. Select Play Ring Patterns.
3. Select a ring pattern (you can listen to
it using the Play and Stop options).
4. Select a new ring pattern by pressing
the Apply option.
5. Press Cancel to exit the Play Ring
Patterns screen.
A steady indicator means that an extension or
feature beside it is active. A flashing indicator
means the line is on hold or the feature is in
the process of being programmed.
LED Indicator 67
Nortel Networks Confidential