Lan Static Dhcp Screen - ZyXEL Communications P-2304R-P1 Series User Manual

Table 36 Network > LAN > DHCP Setup
LABEL
Pool Size
DNS Server
First DNS Server
Second DNS
Server
Third DNS Server
Apply
Reset

7.2.3 LAN Static DHCP Screen

This screen has no effect if the DHCP server is not enabled. You can enable it in
Network > LAN > DHCP Setup.
Use this screen to make the ZyXEL Device assign a specific IP address to a specific computer
on the LAN. To access this screen, click Network > LAN > Static DHCP.
P-2304R-P1 Series User's Guide
DESCRIPTION
Enter the number of IP addresses to allocate. This number must be at least one
and is limited by a subnet mask of 255.255.255.0 (regardless of the subnet the
ZyXEL Device is in). For example, if the IP Pool Start Address is 10.10.10.10,
the ZyXEL Device can allocate up to 10.10.10.254, or 245 IP addresses.
Specify the IP addresses of a maximum of three DNS servers that the network can
use. The ZyXEL Device provides these IP addresses to DHCP clients. You can
specify these IP addresses in the following ways.
Custom Defined - enter a static IP address
From ISP - provide the DNS servers provided by the ISP on the WAN port
DNS Relay - have the ZyXEL Device act as a DNS proxy. The ZyXEL Device's
LAN IP address displays in the field to the right (read-only). The ZyXEL Device
tells the DHCP clients on the LAN that the ZyXEL Device itself is the DNS server.
When a computer on the LAN sends a DNS query to the ZyXEL Device, the
ZyXEL Device forwards the query to the ZyXEL Device's system DNS server
(configured in the WAN > Advanced screen) and relays the response back to the
computer. You can only select DNS Relay for one of the three servers; if you
select DNS Relay for a second or third DNS server, that choice changes to None
after you click Apply.
None - do not use this DNS server. If you select None for all of the DNS servers,
you must use IP addresses to configure the ZyXEL Device and to access the
Internet.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Chapter 7 LAN
91