ZyXEL Communications EX3510-B1 User Manual page 125

The following table describes the labels in this screen.
Table 32 Network Setting > Home Networking > Static DHCP
LABEL DESCRIPTION
Static DHCP Click this to add a new static DHCP entry.
Configuration
# This is the index number of the entry.
Status This field displays whether the client is connected to the Zyxel Device.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
IP Address This field displays the IP address relative to the # field listed above.
Modify Click the Edit icon to have the IP address field editable and change it.
Click the Delete icon to delete a static DHCP entry. A window displays asking you to confirm
that you want to delete the selected entry.
If you click Static DHCP Configuration in the Static DHCP screen or the Edit icon next to a static DHCP
entry, the following screen displays. Using a static DHCP means a client will always have the same IP
address assigned to it by the DHCP server. Assign a fixed IP address to a device by selecting the
interface group of this device and its IP address type and selecting the device/computer from a list or
manually entering its MAC address and assigned IP address.
Figure 73 Static DHCP: Static DHCP Configuration/Edit
The following table describes the labels in this screen.
Table 33 Static DHCP: Static DHCP Configuration/Edit
LABEL DESCRIPTION
Active Click this switch to enable or disable the connection between the client and the Zyxel
Device. When the switch goes to the right
Group Name Select the interface group name for which you want to configure static DHCP settings. See
Chapter 15 on page 194
IP Type This field displays IPv4 for the type of the DHCP IP address. At the time of writing, it is not
allowed to select other type.
Chapter 8 Home Networking
for how to create a new interface group.
EX3510-B1 User's Guide
125
, the function is enabled. Otherwise, it is not.