Power/Charge Gauge; State Of Charge (Soc) Gauge For High Voltage Battery - Hyundai KONA Electric 2023 Owner's Manual

Foreword / Starting Your Electric Vehicle

Power/Charge Gauge

The Power/Charge Gauge shows the
energy consumption rate of the vehicle
and the charge/discharge status of the
regenerative brakes.
POWER :
This portion of the gauge indicates the
amount of electrical power supplied to
the EV motor while driving.
CHARGE :
This portion of the gauge indicates the
amount of charging to the EV battery
when regenerative braking is applied.
1-50
State of Charge (SOC) Gauge for
High Voltage Battery
OOSEV040474L
The SOC gauge shows the charging
status of the high voltage battery.
"L (Low)" position on the indicator
indicates that there is not enough
energy in the high voltage battery.
"H (High)" position indicates that the
driving battery is fully charged.
When driving your vehicle for long
distances on the highway or in rural
areas, make sure to check that the
State of Charge (SOC) is sufficient to
get to your destination and make sure
to map out useable charging locations
along your route.
When there are 2 gauge bars (near the "L
(Low)" on the SOC gauge, the warning
light (
battery level.
When the warning light (
the vehicle can drive an additional 12~18
miles (20~30 km ) depending on the
driving speed, heater/air conditioner,
weather, driving style, and other factors.
Charging is required.
NOTICE
When there are 1-2 gauge bars left for
the high voltage battery, the vehicle
speed is limited and then eventually the
vehicle will turn OFF. Charge the vehicle
immediately.
OOSEV042475N
) turns ON to alert you of the
) turns ON,