Table of Contents
Advertisement
Driving Your Vehicle
REGENERATIVE BRAKING SYSTEM
Regenerative Braking (Paddle
Shifter)
The paddle shifter is used to adjust the
regenerative braking level from 0 to 3
during decelerating or braking.
Left side (
): Increases regenerative
braking and deceleration.
Right side (
): Decreases
regenerative braking and deceleration.
Pull and hold the left side paddle
shifter for more than 0.5 seconds
and One Pedal Driving function is
operated, increasing the regenerative
braking. In this case, stopping the
vehicle is possible by keep on pulling
the paddle shifter.
Refer to the following pages on "One
Pedal Driving".
With the Smart Recuperation System
activated, pull and hold the right side
paddle shifter for over 1 second to
turn on and off the automatic change
of the regenerative braking. However,
nothing will happen if the Smart
Recuperation System is not activated
from the User Settings mode. To
activate or deactivate the function go
to 'User settings
Smart recuperation'.
Refer to the following pages on
"Smart Recuperation System".
6-16
OOS057006
Convenience
Information
The paddle shifter does not operate when:
The [
] and [
pulled at the same time.
The vehicle is decelerating by
depressing the brake pedal.
The Cruise Control system or Smart
Cruise Control system is activated.
The selected regenerative braking level
is displayed on the instrument cluster.
Initial setting of the regenerative
braking level and adjustable range vary
according to the selected Drive mode.
Initial
Drive mode
setting
ECO+
2
ECO
2
COMFORT
SPORT
For more details, refer to "Drive Mode
Integrated Control System" in this
chapter.
] paddle shifters are
OOSEV040491R
Adjustable
Range
0-3
0-3
1
0-3
1
0-3
Advertisement
Chapters
Table of Contents
