Hyundai KONA Electric 2023 Owner's Manual page 394

CAUTION
Take the following precautions to
maintain optimal performance of the
detecting sensor:
Never disassemble the rear corner
radar or radar assembly, or cause any
damage to it.
If has been damaged or impacted
in any way, on the rear corner radar
or near the radar, even though the
warning message does not appear
on the cluster, Blind-Spot Collision-
Avoidance Assist may not operate
properly. Have the vehicle be
inspected by an authorized HYUNDAI
dealer.
If the rear corner radars have been
replaced or repaired, have the
vehicle inspected by an authorized
HYUNDAI dealer.
Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.
The function may not work properly
if the bumper has been replaced, or
the surroundings of the rear corner
radar have been damaged or paint
has been applied.
If a trailer, carrier, etc. is installed,
it may adversely affect the
performance of the rear corner radar
or the function may not operate.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA)" section in this chapter.
Blind-Spot Collision-Avoidance
Assist Settings
Setting features
Blind-Spot Safety
With the vehicle on, select or deselect
from the Settings menu to set whether or
not to use each function.
-
function will warn the driver with a
warning message, an audible warning,
steering wheel vibration and braking
assist will be applied depending on
the collision risk levels.
-
function will warn the driver with
a warning message, an audible
warning and steering wheel vibration
depending on the collision risk levels.
Braking will not be assisted.
-
turn off.
07
OTM070096N
7-37