Auto Defogging System (Only For Automatic Climate Control System) - Hyundai KONA Electric 2023 Owner's Manual

Hide thumbs Also See for KONA Electric 2023:
Table of Contents

Advertisement

Auto Defogging System
(only for automatic climate
control system, if equipped)
Auto defogging reduces the possibility of
fogging up the inside of the windshield
by automatically sensing the moisture on
inside the windshield.
The auto defogging system operates
when the heater or air conditioning is on.
When the Auto Defogging
System operates, the
indicator will illuminate.
If a high amount of humidity is detected
in the vehicle, the Auto Defogging
System will be enabled.
The following steps will be performed
automatically:
Step 1) The air intake control will change
to Fresh mode.
Step 2) The mode will be changed to
defrost direct airflow to the
windshield.
Step 3) The A/C button will turn ON.
Step 4) The fan speed will be set to MAX.
If the air conditioning is off or
recirculated air position is manually
selected while Auto Defogging System is
ON, the Auto Defogging System Indicator
will blink 3 times to signal that the
manual operation has been canceled.
To cancel the auto defogging system
1. Press the START/STOP button to the
ON position.
2. Press the front defroster button over 3
seconds.
3. The front defroster button indicator
will blink 3 times and then ADS OFF
will illuminate on the climate control
OOSEV040027L
information screen when the auto
defogging system is canceled.
To reactivate the auto defogging system
1. Press the START/STOP button to the
ON position.
2. Press the front defroster button over 3
seconds.
3. The front defroster button indicator
will blink 6 times and then ADS OFF
will go out on the climate control
information screen when the auto
defogging system is reactivated
05
5-95

Advertisement

Table of Contents
loading

Table of Contents