Maintenance
Headlight, Position Lamp,
Turn Signal Lamp and Daytime
Running Light Bulb Replacement
Type A
(1) Turn signal lamp
(2) Headlight (High/Low)
(3) Daytime running light (if equipped) /
Position lamp (LED)
(4) Side marker (LED)
9-46
Handle halogen bulbs with care.
Halogen bulbs contain pressurized
gas that will produce flying pieces
OOSEV091042N
of glass that could cause injuries if
broken.
Wear eye protection when changing
a bulb. Allow the bulb to cool down
before handling it.
Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.
Never touch the glass with bare
hands. Residual oil may cause the
bulb to overheat and burst when lit.
A bulb should be operated only when
installed in a headlight.
If a bulb becomes damaged or
cracked, replace it immediately and
carefully dispose of it.
WARNING
OLMB073042L