High Mounted Stop Lamp Replacement - Hyundai KONA Electric 2023 Owner's Manual

Tail lamp (Type A)
1. Turn off the vehicle.
2. Open the liftgate.
3. Remove the service cover using a flat-
blade screwdriver.
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
5. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the socket into the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
8. Reinstall the lamp assembly to the
body of the vehicle.
Tail / Stop lamp / Side marker (Type B)
If the LED lamp does not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.
Turn signal lamp / Reverse lamp
If these lamps do not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.
High Mounted Stop Lamp
OOS077069L
Replacement
If the high mounted stop lamp (LED)
does not operate, contact an authorized
HYUNDAI dealer.
09
OOSEV078032
9-51