Hyundai KONA Electric 2023 Owner's Manual page 265

Convenient Features
Limitations of the High Beam Assist
High Beam Assist may not work properly
in the following situations:
Light from a vehicle is not detected
because of lamp damage, or because
it is hidden from sight, etc.
Headlight of a vehicle is covered with
dust, snow or water.
A vehicle's headlights are off but the
fog lamps are on and etc.
There is a lamp that has a similar
shape as a vehicle's lamp.
Headlights have been damaged or not
repaired properly.
Headlights are not aimed properly.
Driving on a narrow curved road,
rough road, uphill or downhill.
Vehicle in front is partially visible on a
crossroad or curved road.
There is a traffic light, reflecting sign,
flashing sign or mirror ahead.
There is a temporary reflector or flash
ahead (construction area).
The road conditions are bad such as
being wet, iced or covered with snow.
A vehicle suddenly appears from a
curve.
The vehicle is tilted from a flat tire or
is being towed.
Light from a vehicle is not detected
because of exhaust fume, smoke, fog,
snow, etc.
For more details on the limitations
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA)" section in chapter 7.
5-74
WARNING
At times, High Beam Assist may not
work properly. It is the responsibility
of the driver for safe driving
practices and always check the road
conditions for your safety.
When High Beam Assist does not
operate normally, change the
headlight position manually between
high beam and low beam.