Motor Compartment Panel Fuse Replacement - Hyundai KONA Electric 2023 Owner's Manual

Maintenance
Motor Compartment Panel Fuse
Replacement
Blade type fuse
Cartridge type fuse
1. Turn the vehicle off.
2. Turn all other switches OFF.
3. Remove the fuse panel cover by
pressing the tab and pulling up.
4. Check the removed fuse; replace it
if it is blown. To remove or insert the
fuse, use the fuse puller in the motor
compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorized HYUNDAI dealer.
NOTICE
After checking the fuse panel in the
motor compartment, securely install
the fuse panel cover. You may hear a
clicking sound if the cover is securely
latched. If it is not securely latched,
electrical failure may occur from water
contact.
9-38
Multi fuse
If the multi fuse is blown, it must be
OOSEV070010L
removed as follows:
1. Turn the vehicle off.
2. Disconnect the negative battery
cable.
3. Remove the fuse panel cover by
pressing the tab and pulling it up.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of
the same rating.
OOSEV070011L
6. Reinstall in the reverse order of
removal.
If the multi fuse is blown, consult an
authorized HYUNDAI dealer.
OOSEV078009