How To Set The Charging Rate Of The Portable Chargerv - Hyundai KONA Electric 2023 Owner's Manual

How to set the charging rate of the
portable chargerv
Plug
Charging an electric vehicle at home can
stress the household electrical system
more than a typical household appliance.
Most modern residential electrical
circuits are rated at 15 or 20 amps. The
EV portable charger is rated to supply a
12A continuous load. To avoid tripping
a fuse or breaker in the household, the
portable charger charging rate can be
reduced. Follow the steps below to set
the charging rate of the portable charger.
1. Check the current output of the
electrical outlet prior to connecting
the portable charger in order to
determine the permissible charging
rate.
2. Connect the plug to a household
electric outlet.
3. Check the LED display on the portable
charger controller. The indicator 8A,
10A or 12A will be displayed.
Electric Outlet
4. The charging rate (amps) can be
OAEE046506N
5. The charging rate (12A, 10A, 8A) on the
6. When the charging rate is set, follow
adjusted on the portable charger
controller. Press the button (1) on the
back of the controller.
LED display changes each time you
press the button. Refer to the table to
adjust the charging rate based on the
electrical outlet current output.
the procedure in the next section to
connect your vehicle.
01
OOSEVQ018054
1-35