Functional Checks (See Also Chapter 4); System Checks - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
10-5-2

Functional Checks (See Also Chapter 4)

The functional checks take about 60 minutes to perform. Refer to the system user documentation
whenever necessary.
10-5-2-1

System Checks

Table 10-7
÷
Doppler Modes
Software Options
Keyboard Test
Software Menu
Measurements
NOTE: * Some software may be considered standard depending upon system model configuration.
10-8
PROPRIETARY TO GE
8
EVISION
System Functional Checks
Step
Verify basic B-Mode (2D) operation. Check the basic system controls that affect this mode of
B-Mode
operation.
Verify basic CF-Mode (Color Flow Mode) operation. Check the basic system controls that affect this
CF-Mode
mode of operation.
Verify basic Doppler operation (PW if available). Check the basic system controls that affect this mode
of operation.
M-Mode
Verify basic M-Mode operation. Check the basic system controls that affect this mode of operation.
*Applicable
Verify the basic operation of all optional modes such as Multi-Image, 3D, Harmonics, Cine,... etc.
Check the basic system controls that affect each options operation.
TXmit/Recv
Use the Visual Channel Utility on the loop connect to verify that all system Txmit/recv channels are
Elements
functional.
System
Perform the Automatic Test, to verify that all boards function according to specification.
Diagnostics
Perform the Keyboard Test Procedure to verify that all keyboard controls are OK.
LCD
Verify basic LCD display functions. Refer to Chapter 3 of the User Manual.
Verify Software Menu display functions. Refer to Chapter 3 of the User Manual.
check
Scan a gray scale phantom and use the measurement controls to verify distance and area calculation
accuracy. Refer to the User Manual, Chapter 18, for measurement accuracy specifications.
Section 10-5 - System Maintenance
LOGIQ P3 S
Description
M
ERVICE ANUAL