Chapter 4 − Functional Checks - GE Compax 40E System Service Manual

GE HEALTHCARE
REV 9
SECTION 1
PRELIMINARIES
The functional tests are divided into two parts:
1. The operational tests are intended to ensure that all of the interconnected system components are
operating properly (for different techniques).
2. The performance tests are intended to check that the system's components conform to their
operating specifications.
SECTION 2
OPERATIONAL TESTS
Switch system ON from the MPH Console.
2-1 Table Operational Tests
Test all movements, functionalities and limit positions of the Table by referring to the Operator Manual
2150277, Chapter 4:
Emergency Stop
Patient Support
SID Display
Positioning the Bucky
Cassette Tray
Tomography
Grid Oscillation
Note: Operate cafefully by testing safety and limitation devices simultaneously.
2-2 Technique Tests
From the MPH Console, select the various techniques in turn and check for the correct functionning of
each of them by referring to :
− Operator Manual, Chapter 3 for operating instructions,
− MPH Operator Manual for setting parameters or any other selection of data as required (as for the
Automatic Exposure device).
System Service Manual − SYSTEM COMPAX 40E, CE Marked
CHAPTER 4 − FUNCTIONAL CHECKS
READ SAFETY INSTRUCTIONS ATTENTIVELY PRIOR TO STARTING ANY
FUNCTIONAL TESTS.
Section 4.1
Sections 4.2 & 4.3 (including anticollision device)
Section 4.4
Section 4.5
Section 4.7
Section 4.6
−
with MPH 50/65/80 (including XT, RS 85 and Tomo−Link)
85
DIRECTION 2154260−100