4
Maintenance and shipboard repair
4.1
Maintenance
The Repeater Compass requires no special care and maintenance.
The analogue indication (cards) has to be checked frequently. The indication has to
correspond to the digital indication. If the indications differ, switch off the supply
voltage and restart the Repeater Compass.
If the indication is still false, the analog indication of the Repeater Compass has to be
adjust again (refer to section 2.9).
4.2
Shipboard repair
4.2.1
General
A defective Repeater Compass has to be exchanged completely.
Single parts will not be exchanged.
_________________________________________________________________________________________________________________
Edition: August 2014
Repeater Compass
133-560
Please note:
FLASHING A SOFTWARE
Used microcontroller type is MB 91F 464 A
4-1
Repeater
Compass
3969.DOC010102