Configuration/Status Adjustment - Raytheon 133-560 NG011 Operator's And Service Manual

2.8

Configuration/status adjustment

The sequence and the meaning of the available parameters to configure are shown in
the table below.
A selected parameter can be activated by holding the key operated until the
parameter blinks.
Multiple selections of parameters are possible.
________________________________________________________________________________________________________________
3969.DOC010102
Repeater Compass
133-560
Caution!
Switch off the power supply of the Repeater Compass
after finishing the configuration and restart it.
During the restart the Repeater Compass checks the
validity of the configuration.
Please note:
Possible configuration errors are shown in section 2.8.1.
Caution!
Configure the Repeater Compass very carefully.
A false or invalid configuration leads to malfunction and
error indications.
2-14 Edition: August 2014