3
Installation of the Repeater Compass
3.1
General
_________________________________________________________________________________________________________________
Edition: August 2014
Repeater Compass
133-560
Warning!
Before establishing the cable connection the supply
voltage must be switched off.
Ensure that the supply voltage cannot be switched on
during installation.
Please note:
The Repeater Compass should be connected at the cable
ends without opening of the housing.
Caution!
Do not open the Repeater Compass when mounting it or
during the normal operation.
Caution!
Installation, maintenance and configuration must be
carried out only by properly trained and qualified staff with
a good knowledge of equipment safety regulations.
3-1
Repeater
Compass
3969.DOC010102