Additional Operations During Normal Mode; Dimming - Raytheon 133-560 NG011 Operator's And Service Manual

2.7

Additional operations during normal mode

2.7.1

Dimming

_________________________________________________________________________________________________________________
Edition: August 2014
Repeater Compass
133-560
Indications
Please note:
If there is an alarm present, the illumination cannot be dimmed
to zero (switched off).
2-9
Repeater
Compass
Comments, notes
Continuous brightness adjustment of
- the scale illumination
- the display illumination
- 3-line display
- Status LED
- Function key
With the first operation of the key the
brightness will increase.
After a short release of the key and
operating it again, the brightness
decreases. After min. brightness is
adjusted and the key is pressed for
additional approx. 3 seconds all
illumination is switched off (except the
key itself).If an alarm occurs the LED
lights up with min. brightness after
illumination is switched off.
3969.DOC010102