Electrical Installation Of The Repeater Compass - Raytheon 133-560 NG011 Operator's And Service Manual

3.1.2

Electrical installation of the Repeater Compass

The supply cable of the Repeater Compass that has to be connected to the ships
mains and the heading interface is already connected to the terminal strip inside the
repeater. It is fixed in the cable entry of the repeaters casing.
Connect the voltage supply cable and the data cable (NMEA, Course bus or
CAN Bus) interface as shown in Figure 3-1:
Figure 3-1
See also appended Connection diagram 133-560.HP027.
_________________________________________________________________________________________________________________
Edition: August 2014
Repeater Compass
133-560
Supply voltage
connection behind
the front plate
Plug B1
Cable connection of the Repeater Compass
3-3
Repeater
Compass
Data,
connection behind
the front plate
Plug B5
3969.DOC010102