2.8.1
Possible configuration errors
_________________________________________________________________________________________________________________
Edition: August 2014
Repeater Compass
133-560
Please note that the Repeater Compass always indicates
the selected heading if connected via CAN Bus.
2-19
Repeater
Compass
"EHDT":
Heading transmitted from gyrocompass
but magnetic compass is selected.
There will be no heading indication.
"PHDT":
Heading transmitted from Satellite
compass but magnetic compass is
selected.
There will be no heading indication.
"CHDT":
Heading transmitted from magnetic
compass but Gyro or Satellite compass is
selected.
There will be no heading indication.
"-HdG":
Heading transmitted from magnetic
compass but Gyro or Satellite compass is
selected.
There will be no heading indication.
"-HdM":
Heading transmitted from magnetic
compass but Gyro or Satellite compass is
selected.
There will be no heading indication.
"--HDT":
Heading transmitted from gyrocompass
without "talker":
Heading from alternating sources can be
displayed if a Gyro and a magnetic
compass are connected.
It is as well possible, that there is no
heading indication.
Only one heading source should be
connected.
3969.DOC010102