Status And Alarm Indications; Table 2-1 Led Signalling - Raytheon 133-560 NG011 Operator's And Service Manual

2.2.4

Status and alarm indications

The digital display also reports any possible error or alarm by means of a preset
display code (refer to section 4.2.2). If the Repeater Compass is configured as G-AL
the optical alarm is supported by a buzzer (for detailed information see section 3).
A LED on the left side of the front panel signalizes the status or alarm of the Repeater
Compass and of the telegram:
Table 2-1
No.
1
2
3
________________________________________________________________________________________________________________
3969.DOC010102
Repeater Compass
133-560
LED signalling
LED NMEA interface
green Repeater Compass is available
and the telegram is ok.
red Gyro Compass is defective.
Satellite compass is defective.
Missing data communication to
compass.
yellow During correction of the
analogue indication (heading).
During configuration of the
Repeater Compass.
Please note:
For NMEA telegram "THS" status indication with respect to the
LED at the front plate, see 2.8.
CAN / Heading Serial interface
Gyro Compass is available.
Satellite compass is available.
Gyro Compass is defective.
Satellite compass is defective.
Missing data communication to
compass.
Settling phase of the Gyro
Compass.
2-4 Edition: August 2014