Indications; Analogue Heading Indication - Raytheon 133-560 NG011 Operator's And Service Manual

CAN Bus Structure
Normal operation
Correction of analogue
2.2

Indications

2.2.1

Analogue heading indication

The serial heading information is converted into steps on the Repeater Compass PCB
for the stepping motors. The stepping motors turn the 360° and the 10° card.
*Raytheon Anschütz specific
________________________________________________________________________________________________________________
3969.DOC010102
Repeater Compass
135.0
approx. 11 seconds
Test and show
adjusted
configuration
8.8.8.8.
approx. 14 seconds
Configuration
-CF-
approx. 16 seconds
heading
133-560
Test Software status → Selected interface → Selected
heading source → Selected heading indication (offset) →
selected serial interface → CAN Bus address → Normal
operation
Serial interface → CAN Bus* → CAN Bus address → No
heading offset → Heading offset
2-2 Edition: August 2014