Fault Operation; Switching Off The Repeater Compass - Raytheon 133-560 NG011 Operator's And Service Manual

2.10

Fault operation

Effect:
Measures: Check connections, or call RAYTHEON Anschütz service.
2.11

Switching off the Repeater Compass

The Repeater Compass is switched off by switching off the supply voltage.
_________________________________________________________________________________________________________________
Edition: August 2014
Repeater Compass
133-560
Please note:
All possible error indications, their causes and required
measures are described in detail in section 4.2.2.
The heading indication on the digital display does not correspond to the
heading of the ship.
Indications
(red)
flashing
or:
flashing
Comments, notes
- LED lights up red continuously and cannot be dimmed
to zero.
Types of errors:
"---.-" :
- Serial interface defective or
- transmitted telegram invalid or
- input signal disturbed or
- configuration not according to the current telegrams
or
operation mode (operator fault)
"Con" :
- No data transmitted or
- Serial interface is not connected.
- Magnetic heading sensor defect
- Satellite heading sensor defect
2-23
Repeater
Compass
3969.DOC010102