Wireless-G PrintServer with Multifunction Printer Support
The Printer Tab - Scan
By default, the computer that sent the print job will be disconnected three minutes after the print job is
completed. Use this screen to change the length of time the computer is connected to the printer.
Auto Disconnect
3 min after job completed. To change the number of minutes before the computer is disconnected from the
printer, enter the new number (1-60) in this field.
Figure 6-9: Printer Tab - Scan
Always connect. If you want the computer to always be connected to the printer, click Always connect.
Click the Save button to apply your change, or click Cancel to cancel your change.
Chapter 5: Using the Web-based Utility
31
The Printer Tab - Scan