About The Print Server Information Screen; Figure 5-5: Program Icons; Figure 5-6: Print Server Information - Connected; Figure 5-7: Print Server Information - Disconnected - Linksys WPSM54G User Manual

Wireless-G PrintServer with Multifunction Printer Support
Program Icon Accessed through the Start Menu
The PrintServer program icons appear in the Start menu. To access these icons, click Start. Select Programs.
Then select Linksys MFP Network Adapter. You will have four options available:
• To uninstall the PrintServer from your computer, click Uninstall.
• To run the wizard that sets up the PrintServer driver, click Diagnostic. Refer to "Chapter 4: Installing the
PrintServer Driver" for details.
• To access the diagnostic utility, click PrintServer Utility. Refer to the following section, "About the
PrintServer Information Screen", for details.
• To run the wizard that sets up the PrintServer, click Setup Wizard. Refer to "Chapter 3: Installing the
PrintServer Using the Setup Wizard" for details.

About the Print Server Information Screen

The Print Server Information screen shows status information for the PrintServer. Use this screen to connect your
computer to the printer for scans, faxes, or usage of a memory card (many printers have a slot for reading
information from a memory card).
Printer Information
Printer Model. The model number of the connected printer.
Status. This section shows the printer's status information. When a computer is connected to the printer, the
Status field states the name and IP address of the computer that is currently connected. When a computer is not
connected to the printer, the Status field says, "On-Line".
Also shown is the number of seconds before the current computer is disconnected from the printer.
Connection status
To scan, fax, or read information from a memory card, your computer must be connected to the printer, indicated
by the message, "Connected". To allow another computer to use the printer, click the Disconnect button. To
manually re-connect to the printer, click the Connect button.
NOTE: The computer MUST be connected to the printer for all scans, faxes, or usage of a
memory card. If the Connection status field says, "Disconnected", then click the Connect button.
(The computer will automatically connect to the printer for print jobs.)
Chapter 5: Using the Diagnostic Utility
About the Print Server Information Screen

Figure 5-5: Program Icons

Figure 5-6: Print Server Figure 5-7: Print Server
Information - Connected Information - Disconnected
22