Wireless-G PrintServer with Multifunction Printer Support
18. Reconnect the power adapter to the PrintServer and click Next.
Wait a few moments while the system checks for the network.
19. Wait a few minutes while the PrintServer connects to your wireless network.
The next screen will indicate that the PrintServer is now part of your wireless network. Click Next.
The order in which you connected the PrintServer, router, and printer is important. If the PrintServer did not
connect to your wireless network, then click Back and review the steps you took.
Chapter 3: Installing the PrintServer Using the Setup Wizard
Installation
Figure 3-20: Reconnect the Power Adapter
Figure 3-21: Checking
Network Connection
Figure 3-22: PrintServer on Wireless Network
15