Wireless-G PrintServer with Multifunction Printer Support
The Wireless Tab - Security
Configure the security of your wireless network on this screen. Wi-Fi Protected Access (WPA), WPA2, and two
levels of Wired Equivalent Privacy (WEP) encryption are available. If you do not want to use wireless security,
select None from the Security Mode drop-down menu.
Wireless Security
Security Mode. To use WPA, select WPA Personal. To use WPA2, which is stronger than WPA, select WPA2
Personal. To use WEP, select the level of WEP encryption you want to use, 64 Bit Keys (10 Hex chars) or
Figure 6-6: Wireless Tab - Security (WPA Personal)
128 Bit Keys (26 Hex chars), which is stronger than 64-bit WEP.
Proceed to the instructions for your security method.
WPA Personal
WPA Encryption Algorithm. TKIP is the default algorithm.
WPA Shared Key. Enter your Shared Key, which must have 8-63 characters in length.
Click the Save button to apply your changes, or click Cancel to cancel your changes.
WPA2 Personal
WPA Encryption Algorithm. AES is the default algorithm.
WPA Shared Key. Enter your Shared Key, which must have 8-63 characters in length.
Click the Save button to apply your changes, or click Cancel to cancel your changes.
Figure 6-7: Wireless Tab - Security (WPA2 Personal)
Chapter 5: Using the Web-based Utility
29
The Wireless Tab - Security