Wireless-G PrintServer with Multifunction Printer Support
The Status Tab - Device
The Device tab displays information about the PrintServer.
Server Details
The PrintServer's settings and status information are displayed here. No values can be changed on this screen.
This screen is for information only. Click the Refresh button to update this information.
Upgrade. If you want to upgrade the PrintServer's firmware, follow these instructions:
1. Visit www.linksys.com and download the firmware upgrade file for the Wireless-G PrintServer with
Multifunction Printer Support.
2. Extract the file on your computer.
3. On the Device screen, click the Upgrade button.
4. On the Firmware Upgrade screen, enter the location of the extracted firmware file, or click the Browse button
to find this file.
5. Click the Start Upgrade button, and follow the on-screen instructions.
Chapter 5: Using the Web-based Utility
The Status Tab - Device
Figure 6-12: Status Tab - Device
firmware: the programming code
that runs a networking device
download: to receive a file transmitted over a network
upgrade: to replace existing software or
firmware with a newer version
Figure 6-13: Firmware Upgrade
34