Configuring The Wireless Printserver Using The Web-Based Utility; Accessing The Web-Based Utility; The Server Page; The Printer Page - Linksys WPS11 User Manual

Configuring the Wireless PrintServer
Using the Web-based Utility

Accessing the Web-based Utility

You can use the Wireless PrintServer's built-in Web-based Utility to configure
the Wireless PrintServer. In order to open the Utility, follow the instructions
below.
Open your web browser and type http:// followed by the Wireless
PrintServer's IP address in the browser's Address box. Use the Bi-Admin soft-
ware to find the IP address. Press Enter.
The Password Screen will appear next. Leave the User Name field blank. The
Password field will be blank as well. If you want to password protect the
Wireless PrintServer, enter a password now. If you don't want to be required
to enter this password every time you log on, check the box next to Save this
password in your password list. This will automatically log you in when you
return to this page. (Note: If you change your password, the automatic login
will not work until you save the new password over the old one.) If you decide
to enter a password, do so and click the OK button. Otherwise, just click the
OK button.
21
Instant Wireless™ Series Wireless PrintServer

The Server Page

When the Configure Server screen appears, enter the Wireless PrintServer
name (in the example shown here SCA71107). Then enter your password (if
you created one) into the Password dropdown box and type it again in the Verify
Password to confirm it. Check all boxes that apply to your network next to the
Enable area under Protocols. Generally, AppleTalk is only for Macintosh net-
works. If you are unsure, however, you may check all boxes. This option,
while giving you the greatest chance of connection, increases network traffic.
Once you've made all your choices, click the Save button.

The Printer Page

Click the Printers tab to open the Printer Status screen. On this screen, you
will be able to see the status of any printers connected to the Wireless
PrintServer. You can also test the printers by clicking the Print Test Page but-
ton corresponding to the printer you want to test.
22