The Setup Tab; Figure 6-2: Setup Tab - Linksys WPSM54G User Manual

Wireless-G PrintServer with Multifunction Printer Support

The Setup Tab

The first screen that appears is the Setup tab and allows you to change the PrintServer's general settings.
WPSM54G Device Name
Enter the PrintServer's name in the field provided. The name is located on a sticker on the bottom of the
PrintServer.
Password
Current Password. To change the PrintServer's password, enter the current password in the Current Password
field.

Figure 6-2: Setup Tab

New Password and Verify Password. Enter the new password in the New Password field, and then enter the
new password again in the Verify Password field.
Protocols
The TCP/IP protocol is enabled by default.
Click the Save button to apply your changes, or click Cancel to cancel your changes.
Chapter 5: Using the Web-based Utility 25
The Setup Tab