Linksys DSHSNMP User Manual page 7

The StackPro II Management Module provides management
options for the Fiber Optic modules as well as the regular RJ-
45 ports for all hubs in the same collision domain. For exam-
ple, when you install an SNMP module in a StackPro II Hub,
you are immediately able to control all of the ports in the
stack.
When used in conjunction with the web interface or the com-
mand console interface, you can use the StackPro II
Management Module to do the following:
• Display a picture of the StackPro II 10/100 hub and monitor
port activity using the web interface
• Generate graphs that show hub or port activity over a select-
ed time period
• Configure each port's security settings
• View hub statistics with RMON on levels 1,2,3 and 9
• Manually control the speed settings (10Mbps, 100Mbps, or
10/100 auto-sensing) for each port on the hub or in the stack.
• Configure hub IP addresses, network protocols, and system
ID settings
• Enable or disable of any port on the hub or in the stack
• Enable, disable, and monitor fiber optic distance extender
modules
• Partition ports
• Generate traps
• Access three security levels of user control
• Configure the console port for use with a modem
• Download free firmware and software upgrades
4