Linksys DSHSNMP User Manual page 30

Device Control Menu
If you click on the device control option in the left-hand win-
dow or your browser, you will see two sub menus drop down,
Port Status and Reset System
Port Status Sub-Menu
The port status menu will only display 8 ports at a time. You
can go to the next or previous set of 8 ports on your StackPro
II Hub by simply clicking on the buttons marked Next and
Previous at the bottom of the display.
The menu will display the following information about each
port. To refresh the display, click again on the Port Status sub-
menu option in the left-hand browser window.
Link Status
Patition Status
Port Speed
Link Control
Port Enable
displays whether or not a link is detect-
ed on the designated port
displays whether or not the hub has
automatically partitioned the designated
port
displays if the port is running at either
10Mbps or 100Mbps
displays whether or not the port's capa-
bility to hold a link has been enabled
displays whether or not the given port
has been enabled or disabled by the user
27