Linksys DSHSNMP User Manual page 18

Trap Receivers Sub-Menu
Once inside the trap menu, you can add, delete, or change
entries on the table. A sample menu is shown below.
Network Management Module Setup
--------------------------------------------------
Entry Address
--------------------------------------------------
[1] 192.168.0.100 PUBLIC
[2] 192.168.0.34
[3] 192.168.0.76
[A] Add New Table Entry
[D] Delete Table Entry
[X] Exit
Press a number (1-3) to change an existing table
entry, or press A to Add, D to Delete, or X to
Exit:
By pressing the table entry ID number, you can edit the entry's
IP address, read community and protocol values. Once you are
finished editing the table, press X to return to the SNMP
Configuration menu. Press X once more to return to the main
menu.
Community
PUBLIC
PUBLIC
15
SNMP/Trap Menu
Protocol
IP
IP
IP