Linksys DSHSNMP User Manual page 29

System Information Menu
By clicking on the System Information heading in the menu
on the left-hand side of the screen, you will be able to view
your managed hub's system settings.
The settings have the following meanings:
Firmware Version
Web Page Version
MAC Address
IP Address
Contact
Name
Location
You can change the contact, unit name, and location settings
for the SNMP managed device.
displays the version of Linksys
firmware that you are using in your
SNMP module
displays the version of the web interface
that you are using to access the SNMP
module
displays the numerical media access
controller address for the managed
device
displays the IP (Internet Protocol)
address for the managed device
contact name for reference, usually
the name of the system administrator
name of the managed Hub unit
the physical location of the hub -- usu-
ally either the city, address, or floor
location of the managed hub. This set-
ting is useful in a WAN situation.
26