Linksys DSHSNMP User Manual page 39

Simple network management protocol (snmp) module
Hide thumbs Also See for DSHSNMP:
Table of Contents

Advertisement

Alignment Error
Frame Too Long
Short Events
Runts
Collisions
Late Events
Very Long Events
Data Rate
Mismatch
displays the number of packets that had
FCS errors and were also of invalid
length.
displays the total number of packets that
were longer than 1,518 octets.
displays the total number of events that
had bit time values of 82 or less. A bit
time is the amount of time that a trans-
mission is left at a particular voltage in
order to determine the transmission rate.
The longer the bit time, the slower the
transmission rate.
displays the total number of events that
had bit times longer than 82 but shorter
than 512.
displays the number of collisions on the
specified port. This number does not
include late event collisions.
displays the number of late collisions.
Any collision detected after 512 bit
times from the start of the transmission
is a late collision.
displays the number of transmissions
that lasted longer than 4 milliseconds
displays the number of times that a
transmission was mismatched in speed
enough to cause a data buffer overflow
or underflow on the port.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dshub24 - etherfast stackpro ii hub

Table of Contents