Vlan Management Tab - Vlan To Ports; Figure 5-14: Vlan Management - Vlan To Ports; Figure 5-15: Vlan To Ports - Join Vlan - Linksys SRW2008 User Manual

WebView Switches

VLAN Management Tab - VLAN to Ports

The VLAN to Ports screen contains fields for configuring VLANs to a ports.
Interface. Displays the interface number.
Mode. Indicates the port to VLAN mode. The possible field values are:
General. Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q
mode).
Access. Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet types
which are accepted on the port cannot be designated. Ingress filtering cannot be enabled/disabled on an access
port.
Trunk. Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can be
untagged.
Join VLAN. Defines the VLANs to which the interface is joined.
VLANs. Displays the PVID tag.

Figure 5-14: VLAN Management - VLAN to Ports

LAG. Indicates if the port is a member of a LAG. If it is a member of a LAG, it cannot be configured to a VLAN. The
LAG to which it belongs can be configured to a VLAN.

Figure 5-15: VLAN to Ports - Join VLAN

Chapter 5: Using the Web-based Utility for Configuration 39
VLAN Management Tab - VLAN to Ports