Table of Contents
Advertisement
WebView Switches
Included VLAN. Maps the selected VLAN to the selected instance. Each VLAN belongs to one instance.
Bridge Priority. Specifies the selected spanning tree instance device priority. The field range is 0-61440.
Designated Root Bridge ID. Indicates the ID of the bridge with the lowest path cost to the instance ID.
Root Port. Indicates the selected instance's root port.
Root Path Cost. Indicates the selected instance's path cost.
Bridge ID. Indicates the bridge ID of the selected instance.
Remaining Hops. Indicates the number of hops remaining to the next destination.
Spanning Tree Tab - MSTP Interface Settings
Network Administrators can assign MSTP Interface settings using the MSTP Interface Settings screen.
The MSTP Interface Settings screen contains the following fields:
Instance ID. Lists the MSTP instances configured on the device. Possible field range is 0-15.
Interface. Displays the interface for which the MSTP settings are displayed. The possible field values are:
• Port. Specifies the port for which the MSTP settings are displayed.
• LAG. Specifies the LAG for which the MSTP settings are displayed.
Port State. Indicates whether the port is enabled for the specific instance.
Type. Indicates if the port is a point-to-point port, or a port connected to a hub. The possible field values are:
• Boundary Port. Indicates the port is a boundary port. A Boundary port attaches MST bridges to LAN in an
outlying region. If the port is a boundary port, it also indicates whether the device on the other side of the
link is working in RSTP or STP mode.
• Master Port. Indicates the port is a master port. A Master port provides connectivity from a MSTP region
to the outlying CIST root.
• Internal. Indicates the port is an internal port.
Chapter 5: Using the Web-based Utility for Configuration
Spanning Tree Tab - MSTP Interface Settings
Figure 5-52: Spanning Tree - MSTP Interface Settings
70
Hide quick links:
Advertisement
Table of Contents
