Table of Contents
Advertisement
WebView Switches
WRR Weight. Displays the WRR weights to queues.
% of WRR Bandwidth. Displays the amount of bandwidth assigned to the queue. These values are fixed and are
not user defined.
QoS Tab - DSCP Settings
The DSCP Settings screen enables mapping DSCP values to specific queues.
The DSCP Settings screen contains the following fields:
DSCP. Indicates the Differentiated Services Code Point value in the incoming packet.
Queue. Maps the DSCP value to the selected queue.
QoS Tab - Bandwidth
The Bandwidth screen allows network managers to define the bandwidth settings for a specified egress
interface. Modifying queue scheduling affects the queue settings globally. The Bandwidth screen is not used with
the Service mode, as bandwidth settings are based on services.
Queue shaping can be based per queue and/or per interface. Shaping is determined by the lower specified value.
The queue shaping type is selected in the Bandwidth screen.
Interface. Indicates the interface for which the queue shaping information is displayed. The possible field values
are:
• Port. Indicates the port for which the bandwidth settings are displayed.
• LAG. Indicates the LAG for which the bandwidth settings are displayed.
Ingress Rate Limit Status. Indicates if rate limiting is defined on the interface.
Rate Limit (62-1000000 Kbps). Defines the amount of bandwidth assigned to the interface. The possible field
values are 62-1000000 Kbps.
Egress Shaping Rate on Selected Port. Indicates if rate limiting is enabled on the interface.
Committed Information Rate (CIR). Defines CIR as the queue shaping type. The possible field value is 64 -
1,000,000 Kbps.
Chapter 5: Using the Web-based Utility for Configuration
QoS Tab - DSCP Settings
Figure 5-38: QoS - DSCP Settings
Figure 5-39: QoS - Bandwidth
60
Hide quick links:
Advertisement
Table of Contents
