Vlan Management Tab - Vlan To Ports; Figure 5-15: Vlan Management - Vlan To Ports; Figure 5-16: Vlan To Ports - Join Vlan - Linksys SRW2024P User Manual

24-Port 10/100/1000 Gigabit Switch with Webview and PoE
Untagged. Packets forwarded by the interface are untagged.
Tagged. Defines the interface as a tagged member of a VLAN. All packets forwarded by the interface are tagged.
The packets contain VLAN information.

VLAN Management Tab - VLAN to Ports

The VLAN to Ports screen contains fields for configuring VLANs to a ports.
Port. Displays the interface number.
Mode. Indicates the port to VLAN mode. The possible field values are:
• General. Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full
802.1Q mode).
• Access. Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet
types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled/disabled
on an access port.
• Trunk. Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can be
untagged.
Join VLAN. Defines the VLANs to which the interface is joined. Select the VLAN ID, then click Apply.
VLANs. Displays the PVID tag.
LAG. Indicates if the port is a member of a LAG. If it is a member of a LAG, it cannot be configured to a VLAN. The
LAG to which it belongs can be configured to a VLAN.
Chapter 5: Using the Web-based Utility for Configuration
VLAN Management Tab - VLAN to Ports

Figure 5-15: VLAN Management - VLAN to Ports

Figure 5-16: VLAN to Ports - Join VLAN

37