Spanning Tree Tab - Mstp Properties; Spanning Tree Tab - Mstp Instance Settings; Figure 5-50: Spanning Tree - Mstp Properties; Figure 5-51: Spanning Tree - Mstp Instance Settings - Linksys SRW2008 User Manual

WebView Switches
• Disabled. Disables point-to-point link.
Point-to-Point Oper Status. Indicates the Point-to-Point operating state.
To run a migration test, press Activate next to the Activate Protocol Migration Test field. The test sends Link
Control Protocol (LCP) packets to test if a data link is enabled.

Spanning Tree Tab - MSTP Properties

MSTP provides differing load balancing scenarios. For example, while port A is blocked in one STP instance, the
same port is placed in the Forwarding State in another STP instance. The MSTP Properties screen contains
information for defining global MSTP settings, including region names, MSTP revisions, and maximum hops.
The MSTP Properties screen contains the following fields:
Region Name. Provides a user-defined STP region name.
Revision. Defines unsigned 16-bit number that identifies the revision of the current MST configuration. The
revision number is required as part of the MST configuration. The possible field range 0-65535.

Figure 5-50: Spanning Tree - MSTP Properties

Max Hops. Indicates the total number of hops that occur in a specific region before the BPDU is discarded. Once
the BPDU is discarded, the port information is aged out. The possible field range is 1-40. The field default is 20
hops.
IST Master. Identifies the Spanning Tree Master instance. The IST Master is the specified instance root.

Spanning Tree Tab - MSTP Instance Settings

MSTP operation maps VLANs into STP instances. Packets assigned to various VLANs are transmitted along
different paths within Multiple Spanning Trees Regions (MST Regions). Regions are one or more Multiple
Spanning Tree bridges by which frames can be transmitted. In configuring MST, the MST region to which the
device belongs is defined. A configuration consists of the name, revision, and region to which the device belongs.
Network Administrators can define MSTP Instances settings using the MSTP Instance Settings screen.
Instance ID. Defines the VLAN group to which the interface is assigned.

Figure 5-51: Spanning Tree - MSTP Instance Settings

Chapter 5: Using the Web-based Utility for Configuration 69
Spanning Tree Tab - MSTP Properties