Statistics Tab - Port Utilization; Figure 5-22: Rmon Events - Events Log; Figure 5-23: Statistics - Port Utilization - Linksys SRW2008 User Manual

WebView Switches
• None. Indicates that no event occurred.
• Log. Indicates that the event is a log entry.
• Trap. Indicates that the event is a trap.
• Log and Trap. Indicates that the event is both a log entry and a trap.
Owner. Displays the device or user that defined the event.
The Add to List button adds the configured RMON event to the Event Table at the bottom of the screen.
The Event Table area contains the following additional field:
Time. Displays the time that the event occurred.

Statistics Tab - Port Utilization

The Port Utilization screen displays the amount of resources each interface is currently consuming. Ports in green
are functioning normally, while ports in red are currently transmitting an excessive amount of network traffic.
Refresh Rate. Indicates the amount of time that passes before the port utilization statistics are refreshed. The
possible field values are:
• No Refresh. Indicates that the statistics are not refreshed.
• 15 Sec. Indicates that the statistics are refreshed every 15 seconds.
• 30 Sec. Indicates that the statistics are refreshed every 30 seconds.
• 60 Sec. Indicates that the statistics are refreshed every 60 seconds.
Chapter 5: Using the Web-based Utility for Configuration
Statistics Tab - Port Utilization

Figure 5-22: RMON Events - Events Log

Figure 5-23: Statistics - Port Utilization

46