Mount The System - Graco Reactor 3 E-XP1 Operation

Installation
Mount the the System System
Mount Mount the System
To prevent serious injury due to the system
tipping over, ensure that the Reactor is
properly secured to the wall.
NOTE: Mounting brackets and bolts are included
NOTE: NOTE:
in the box of loose parts shipped with the
system.
1. Secure the left and right wall mounting
brackets (MB) to the wall. If the brackets do
not line up with the wall stud spacing, bolt a
piece of wood to the studs then secure the
brackets to the wood.
24
2. Use the four holes in the base of the system
frame (BH) to secure the base to the floor.
The bolts are not supplied.
3A8500E