Graco Reactor 3 E-XP1 Operation page 49

System System System
Use the System screen to set system settings.
Description
Setting Setting Setting Description Description
System Name System name that is displayed in the
Reactor Connect App.
Proportioner Type Proportioner model type; see
Models, page 4
Enable Custom Tap to enable/disable custom pump
Pump Sizes sizes.
Pump A Volume Volume of the A side proportioner
pump. Value is editable if Enable
Custom Pump Sizes is checked.
Pump B Volume Volume of the B side proportioner
pump. Value is editable if Enable
Custom Pump Sizes is checked.
MCM Digital Tap to select Input/Output setting
Input/Output 1–2 for the MCM Digital Input/Output
pins 1 and 2 on MCM connector 12.
Input/Output Options:
Input/Output Input/Output
nothing.
Light Light Light Tower
light of the accessory Light Tower
Kit.
Light Light Tower Light
yellow light of the accessory Light
Tower Kit.
Light Tower
Light Light
green light of the accessory Light
Tower Kit.
MCM Digital See MCM Digital Input/Output 1–2.
Input/Output 3–4
MCM Digital See MCM Digital Input/Output 1–2.
Input/Output 5–6
MCM Digital See MCM Digital Input/Output 1–2.
Input/Output 7–8
Supply Supply System Supply System System
Use the Supply System screen to set feed system
settings.
Setting Description Description Description
Setting Setting
Transfer Pump A Tap to select the type of transfer
Type pump used to feed the A side of the
proportioner.
Transfer Pump Type Options:
Air: select when using an
Air: Air:
air/pneumatic transfer pump
(or other non-Graco Electric Transfer
Pump).
Electric: select when using with
Electric: Electric:
Graco Electric Transfer Pumps.
Transfer Pump B Tap to select the type of transfer
Type pump used to feed the B side of the
proportioner. See Transfer Pump A
Type for a list of options.
3A8500E
.
Options: Disabled: Do
Options:
Tower Red: Tower Red: Use to drive the red Red:
Tower Yellow: Tower Yellow: Use to drive the Yellow:
Tower Green: Green: Use to drive the
Tower Green:
Advance Display Module (ADM)
Enable Transfer Tap the checkbox to enable or
Pump Runaway disable Transfer Pump A or B
Alarm Runaway alarms (DAFA or DAFB). The
Transfer Pump Runaway alarms can
be disabled if occurring frequently
and disrupting operation.
NOTE: See help.graco.com NOTE: NOTE:
troubleshooting information for
correcting issues with DAFA or DAFB
alarms.
Enable Smart This feature automatically adjusts
Supply the Electric Transfer Pump pressure
setpoint to maintain appropriate inlet
pressure with various chemicals,
ambient conditions and supply
configurations.
NOTE: This feature is automatically
NOTE: NOTE:
enabled when the inlet pressure
sensors are enabled and at least one
electric transfer pump is installed.
Max Chemical
Tap to enter the chemical volume of
Volume the supply containers.
Enable Low Tap the checkbox to enable/disable
Chemical Alarms Low Chemical Alarms. Tap the
number value to adjust the alarm
threshold.
Enable Inlet Tap the checkbox to enable/disable
Pressure Sensors inlet pressure sensors.
NOTE NOTE: Inlet pressure sensors are NOTE
automatically enabled if flow meters
are enabled.
Enable Inlet Tap the checkbox to enable/disable
Temperature inlet temperature sensors.
Sensors
Enable Low Inlet Tap the checkbox to enable/disable
Temperature Low Inlet Temperature Alarms. Tap
Alarms the number value to adjust the alarm
threshold.
Enable High Inlet Tap the checkbox to enable/disable
Temperature High Inlet Temperature Alarms. Tap
Alarms the number value to adjust the alarm
threshold.
Request Electric Tap Electric Transfer Pump
Transfer Pump calibration button to queue an
Calibration electric transfer pump calibration the
next time the electric transfer pump
is run. Only appears when electric
transfer pumps are selected.
NOTE: After pressing the button,
NOTE: NOTE:
a notice will appear on the screen
notifying the user the calibration is
queued.
49